Product Overview
❆ Power Bank is the perfect accessory for any WISP technician or wireless engineer. Power your devices with
USB-A, USB-C, 24V PoE, and PoE++ (802.3bt).
❆ Carry 26400 mAh of power with you up a tower to remotely power your devices.
❆ The Power Bank is temperature resistant and also features protection from various factors such as input overvoltage,
output overvoltage, short circuit, and incorrect insertion.
Product Specifications
❆ USB-C (In/ Out)
❆ USB-A (Out)
❆ 24V Gigabit PoE(Out)
❆ LAN (In)
❆ PoE++ 802.3af/at/bt (Out) LAN (RJ45 Gigabit)
❆ PoE Output: 802.3af/at/bt 24V Gigabit PoE
❆ USB-A Output: 5V/3A,9V/2A,12V/1.5A 18W (max.)
❆ LED: Battery Indicator Light (100%, 75%, 50%, 25%) USB-C (Input/ Output)
❆ USB-C Input: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A
❆ USB-C Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A,PPS 3.3- 21V/3A
❆ Battery Type: Lithium Polymer Battery
❆ Battery Capacity: 26400mAh/ 98Wh Recharging Time: 3Hrs
User Instructions
❆ Use provided USB-C wall charger and USB-C to USB-C cable to connect VenVolt to USB-C charger. Be sure to fully
charge your VenVolt before your first use. The battery is shipped under 30% due to regulation requirements.
❆ Charging typically takes 3 to 4 hours to fully charge
❆ Charging device PoE Device
❆ To power a PoE device use your own ethernet cable to connect from VenVolt to your device.
❆ Move select switch from Off to 4 for PoE++ port
❆ Move select switch from Off to 3 for 24V Gigabit PoE port
❆ USB-C port is disabled if switch is set to 3 or 4
❆ Charging laptop or phone with USB-C port
❆ To power a USB device use included cable or your own cable
❆ Move select switch to Off
❆ Battery will automatically detect a device has been connected and charging will begin.
❆ Charging a device via the USB-A port
❆ The USB-A port is on when select switch is set to 3 or 4. When the select switch is set to OFF only the USB-C port is active.
Safety Precautions
❆ Do not expose the product to fire or other high-temperature environments. The recommended usage temperature is between 14 degrees F to 113 degrees F.
❆ Do not expose the product to water
❆ Stop using is any of the following conditions occur: electrolytic liquid leakage, overheating, color change, or other unusual conditions.
❆ Do not short circuit the positive (+) and negative (-).
Maintenance
❆ Do not expose the VenteVolt 2 to direct sunlight for long periods of time or leave it any place with high temperature or high humidity.
❆ Discharge and recharge the VenVolt2 periodically if you don’t plan to use it for an extended period of time.
Online Service
